MAX Engraver Features:
The MAX system offers:
• A built-in cylindrical feature for engraving round items
• Includes high-speed Vision Series 5 Controller
• Engraving speeds up to 10” per second
• Removeable 8" x 12" T-Slot Table For Flat Engraivng
• A limited 2-year warranty
MAX Engraver Specifications:
MAX S5 Specialty Engraver Specifications Chart
|Software||Vision Express standard (Expert or Pro optional)|
|Maximum work area||8" x 12"|
|Maximum size part||Flat 11.75" (L) x Any Width x 11" (H)
Cylindrical 12" x 11" Diameter
|Spindle Type||11/64", 6mm or 1/4" / Top Loading|
|Resolution / Speed||0.0002" - 10"/sec|
|Table Type||Aluminum T-slot, Cylindrical|
|Controller||Internal Series 5 Controller with Pendant|
|Power Requirements||110/220V 10 Amp|
|Physical Dimensions||24"(W) x 17"(D) x 33.5"(H)|
|Shipping Dimensions||45"(W) x 35"(D) x 42"(H) 380 lbs|
|Additional Options||Top/Bottom Collet, Ring Attachment
*3D Engraving Software
MAX Engraver Accessories:
PEN ENGRAVING KIT
This fixture allows you to engrave around the inside and outside of most rings or other cylindrical objects.(Compatible with the MAX and Max Pro.)
Min. Dia: 5/8" Max Dia: 4"
Multi Mat eliminates the need for double stick tape, clamps, vacuum tables, and most other hold down methods on many engravable items. Multi Mat will hold most types of engraving stock, including brass, aluminum, plastic, and acrylic. Just press it into place on any size engraving table and you’re ready to go, and because Multi Mat is produced with a special rubber coating on both sides, it cleans easily for extended use.
Simply slide the clamp onto the T-slot table surface and position it over the edge of the engraving stock. The downward clamping force eliminates bowing and problems. This clamp can be used with material up to 1/4” thick. Fits all Vision T-slot tables.
This clamp is designed to secure engraving materials from the top surface and avoids bowing in most applications. This clamp will hold material thicknesses of .020, .032, .062, and .125 by rotating the clamp and tightening a thumbscrew. Fits all Vision T-slot tables.
This clamp is designed to hold down square or rectangular plates. By lining up the “V” cut-out of the clamp with the corner of the plate, the engraver is allowed maximum engraving space. It will accommodate material as thin as 1/32”. Fits all Vision T-slot tables.
|UNIVERSAL CLAMPING BARS w/MEDALLION HOLDER
These clamping bars hold small flat items, including name badges with pin backs, securely. By rotating the clamping bars they will hold 1 to 3 round objects at a time. This allows you to engrave multiple notary seals, coasters, paperweights, and a variety of other circular items. With a place for the “eye” of medallions, this clamp adapts to any vise or table that has a T-slot system.
|PEN & MEDALLION FIXTURE
This is a double-sided fixture that when turned in one direction accommodates a pen and when turned in the other direction accommodates a medallion, seal, or other circular item. With a space for the “eye” of the medallion, this fixture is usable with the Versa Vise or Quick-Lock vise. Fits all Vision T-slot tables.
This double-sided clamp secures items from the edge. It is ideal for items that are being cut, contoured, or engraved. Fits all Vision T-slot tables.
|UNIVERSAL PIN FIXTURES
Available for the Versa Vise, Quick-Lock Vise, Vision T-slot table, and Self-Centering Vise. These fixtures enable engraving on all unique-sized pens, lighters, knives, key-chains, and many other irregular-shaped items.
|MULTIPLE UNIVERSAL PIN FIXTURE VISE
This combination of a Versa Vise and three universal pin fixtures enables quick and easy setup for engraving multiple items of various shapes. Fits all Vision T-slot tables.
|VERSA VISE II
The Versa Vise can be used alone or in conjunction with other fixtures to hold a variety of shapes and sizes.
This fixture enables engraving on 1 5/8" & 2" diameter notary seals, medallions, coasters, paperweights, and other round objects. Can be used with the Quick-Lock or Versa Vise. Fits all Vision T-slot tables.
This vise is specifically designed for T-slot table users. Its “cam” type locking device allows for quick changing of parts. Supplied with a removable front clamping plate which allows for holding thicker items. Fits all Vision T-slot tables.
NSK HIGH-FREQUENCY 50,000 RPM ENGRAVING SPINDLE
|UNIST Misting System
The Unist Micro-Dispensing Coolant System with solenoid, significantly reduce the cost and volume of cutting fluid used in metal cutting, forming, and stamping operations. Applying a vegetable-based, biodegradable lubricant in controlled amounts will reduce wear and tear of cutting tools during machining operations.
|DIAMOND DRAG ADAPTER
The DIAMOND DRAG ADAPTER screws onto the end of almost any spindle and allows simple & solid mounting for diamond scratch engraving. Spindle bearing strain is totally eliminated using this devices.
|DRAWBARS / COLLETS
A collet spindle allows you the versatility to change cutter sizes if needed or to switch from a split to a solid collet. Simply replace the drawbar and collet to the desired size.
A. Split Collet - Used for holding cutters solidly while doing light milling, cutouts, & other heavy engraving. Collet spindles hold both long & short cutters.
B. Solid Collet - Converts your collet spindle to a standard top load spindle for standard engraving or burnishing.
C. Drawbar - For use with the collet spindle.
Designed to assist in burnishing lacquered brass and anodized metals with just the right amount of pressure. Also used to mark glass. Available in 1/8”, 11/64”, 1/4”, 4mm and 6mm sizes.
Durable aluminum handle “Vision” cutter wrench.
|VACUUM CHIP REMOVAL SYSTEM
Quiet vacuum pump for removing engraving chips. The unit has a large filtered canister with replaceable collection bag. Includes vacuum nose cone and kink resistant hose.
|VACUUM CHIP REMOVAL NOSES
Designed for chip removal while doing cutouts. Nose is constructed of durable plastic. Vacuum tube allows for hookup to vacuum pump or shop vac.
A. Large opening style is designed for engraving large letters.
B. Small opening is designed for tight places and small letters.
Available for all engraving machines. Belts are made of durable 1/8”urethane for long wear and better traction. Please specify machine type and total length of belt. 2 belt minimum purchase.
Custom belts can be made to order if size is provided.
Call for information